Ecotack Corcho

Water-based contact adhesive for the installation of cork wall coverings (tiles and/or in rolls) on properly prepared walls.

Solvent-free
Fibre-free


Odourless
Ready to use


Clean with water

APPLICATION

Double-side application with a roller, brush or A1 notched spreader. Allow to air for 40 to 60 minutes (at 20 °C and 65% humidity), until it becomes transparent and does not transfer to the touch. Once dry, position the cork and press firmly and evenly across the entire surface to be glued, especially on the edges, and prevent the formation of air pockets.

COVERAGE

100-150 g/m2 per side depending on the porosity of the surfaces to be glued.

CAPACITY VARIATIONS/REF.

1kg/1890-09
2,5kg/1890-85