PVC and natural and synthetic rubber flooring

PROFESSIONALS  - Polyurethane adhesives 
UZIN KR 430 (A+B)

Two-component polyurethane adhesive for natural or synthetic rubber floor tiles up to 10 mm, PVC and LVT tiles, linoleum tiles up to 4 mm. On absorbent and non-absorbent surfaces.

CHARACTERISTISCS

Indoor-outdoor use.
Non-standard product, available upon request. Available in approximately 15 days.
Pot time of mix: 20–30 min.
Working time: Approx. 40 min.
Minimum temperature: 15 ºC
Coverage: 250-600 g/m2. Smooth or slightly rough backing.
Application: A2, A5, B1 or B2 notched spreader.

Request the technical sheetRequest the security sheet

Related products

NC 148 Fibrada

Fibre-cement based SELF-LEVELLING COMPOUND for standard screeds. Also for use

UZIN UZ 57 L

For the installation of conductive linoleum flooring and textile carpets.

UZIN PE 470 (A+B)

Solvent-free, water-free two-component epoxy resin primer with good flow characteristics

Laboratorios Rayt, S.A.U.
Calle Garriga, 188 - 200
Apartado Correos 39
E-08910 Badalona
Barcelona - Spain
+34 934 607 820
Info@rayt.com

    Fill in the form and we will send you the requested document by email:



    LABORATORIOS RAYT, S.A.U. as the data controller will process your data for the purpose of replying to your query or request. You may access, rectify and erase your data, and also exercise other rights by consulting the additional detailed information on data protection in our Privacy Policy

      Fill in the form and we will send you the requested document by email:



      LABORATORIOS RAYT, S.A.U. as the data controller will process your data for the purpose of replying to your query or request. You may access, rectify and erase your data, and also exercise other rights by consulting the additional detailed information on data protection in our Privacy Policy